Portable Milling Processing Case 1
GMM series is GIRET factory edge milling machine machine series product, this series of products are antependium perfect, the processing example will introduce GMM-10 type portable/portable edge milling machine machine processing examples, this type of edge milling machine machine has the characteristics of sloping machine, processing speed is relatively similar products faster, milling groove surface finish after completely through the pressure RongQiChang of X-ray detection.
Picture 1: portable groove machine in processing pipe outside
Picture 2: handheld groove machine with a groove depth instructions, and may, according to the customer demand to arbitrarily regulate slope width; The power switch has soft start protection function, prevent the mistake that the safety of the start operator.
Picture 3: portable edge milling machine machining steel mouth and circular arc slope in the mouth KongPo examples
Picture 4: amplification handheld chamfering machine/edge milling machine machine/groove machining steel plate groove surface examples
Picture 5: high-density synthetic plastic packaging handheld/portable edge milling machine machine (PFMS) load import and export product requirements, convenient tool factory store and handling.
Handheld/portable edge milling machine machine (PFMS) products processing, the thickness of the steel plate can not limited, processing more than 150 mm pipe diameter best, circular hole than 50 mm, processing slope 15 mm width, the largest can reach 18 mm, the processing speed in 500 mm/min, surface finish 3.2 u m. |
